Guduro SZUV-T1120-high zafin jiki juriya
Gaba?aya Gabatarwa
Halaye:
SZUV -T1120 rawaya SL guduro ne wanda ke da aikin zafi mara misaltuwa. Yana iya jure yanayin zafi sama da 200 ℃ a ?an gajeren lokaci da 120 ℃ a cikin dogon lokaci. An tsara shi don sarrafa nau'ikan zafin jiki iri-iri da aikace-aikacen gwaji mara kyau.
Na yau da kullun fasali
BABBAN KARFI da KYAU TSIRA
SZUV-T1120 iya tsayawa zafi, ruwa da kaushi, kamar fetur, watsa ruwa, mai da coolant. Tare da juriya na zafi wanda bai dace ba, ya dace da kwarara, HVAC, haske, kayan aiki, gyare-gyare da aikace-aikacen gwajin rami na iska.
-GINUWA DA CI GABA
Ta hanyar samar da fitarwa da sauri da sassa tare da santsi, mai sau?in sarrafawa, SZUV-T1120 na iya kammala aikin ku daga zane zuwa sassan gwaji a cikin mafi guntu lokaci.
Abubuwan Aikace-aikace
-Kar?ashin gwajin ?angaren kaho
-High zazzabi RTV gyare-gyare
- Gwajin rami na iska
-Gwajin fitilu
- Composite autoclave kayan aiki
- Gwajin bangaren HVAC
- Gwajin cin abinci da yawa
- Orthodontics
FILIN APPLICATION
Ilimi
Hannun Molds
Sassan Motoci
Marufi Design
Zane-zane
Likita
DUKIYAR JIKI (ruwa)
| Bayyanar | fari |
| Yawan yawa | 1.13g/cm3@ 25 ℃ |
| Dankowar jiki | 400 ~ 480 cps @ 29 ℃ |
| Dp | 0.152 mm |
| Ec | 7.6mJ/cm2 |
| Gine-gine kauri | 0.05 ~ 0.12mm |
?
DUKIYAR MIKINI (DA-GYARA)
| Aunawa | Hanyar Gwaji | Daraja | |
| 90-minti UV bayan magani | 90-minti UV +2 hours @ 160 ℃ thermal bayan magani | ||
| Hardness, Shore D | Saukewa: ASTM D2240 | 87 | 91 |
| Modules mai sassauci, Mpa | Saukewa: ASTM D790 | 2678-3186 | 3502-3631 |
| ?arfin sassau?a, Mpa | Saukewa: ASTM D790 | 60-80 | 90-101 |
| Modules tensile, MPa | Saukewa: ASTM D638 | 2840-3113 | 3484-3771 |
| ?arfin ?aure, MPa | Saukewa: ASTM D638 | 58-67 | 50-62 |
| Tsawaitawa a lokacin hutu | Saukewa: ASTM D638 | 4-8% | 4-6% |
| ?arfin tasiri, ?wan?wasa lzod, J/m | Bayani na ASTM D256 | 18-30 | 16-23 |
| Zafin karkatar da zafi, ℃ | ASTM D 648 @ 66PSI | 81 | 98 |
| Canjin gilashi, Tg, ℃ | DMA, Babban | 100 | 111 |
| Coefficient na thermal fadadawa, E6/℃ | TMA (T | 79 | 86 |
| Thermal conductivity, W/m.℃ | 0.171 | ||
| Yawan yawa | 1.24 | ||
| Ruwan sha | Saukewa: ASTM D570-98 | 0.49% | 0.46% |
?
Kayayyakin Injini na Kayan da Aka Magance Bayan-Cured
| AUNA | HANYAR GWADA ? | ? | DARAJA |
| ? | ? | 90-minti UV bayan magani | 90-minti UV +2 hours@160℃thermalbayan warkewa |
| Hardness, Shore D | Saukewa: ASTM D2240 | 87 | 91 |
| Modules mai sassauci, Mpa | Saukewa: ASTM D790 | 2678-3186 | 3502-3631 |
| ?arfin sassau?a, Mpa | Saukewa: ASTM D790 | 60-80 | 90-101 |
| Modules tensile, MPa | Saukewa: ASTM D638 | 2840-3113 | 3484-3771 |
| ?arfin ?aure, MPa | Saukewa: ASTM D638 | 58-67 | 50-62 |
| Tsawaitawa a lokacin hutu | Saukewa: ASTM D638 | 4-8% | 4-6% |
| ?arfin tasiri, ?wan?wasa lzod, J/m ? | Bayani na ASTM D256 ? | 18-30 ? | 16-23 |
| Yanayin zafin zafi,℃ ? | ASTM D 648 @ 66PSI ? | 81 | 98 ? |
| Canjin Gilashi, Tg ,℃ | DMA,E”kololuwa ? | 100 | 111 ? |
| Coefficient na thermal fadadawa, E6/℃ | TMA(T) ? | 79 ? | 86 ? |
| ?arfafawar thermal, W/m.℃ | ? | 0.171 | ? |
| Yawan yawa | ? | 1.24 | ? |
| Ruwan sha | Saukewa: ASTM D570-98 | 0.49% | 0.46% |
